• ProJoint™ MAX™  

    A high strength epoxy paving grout - suitable for vehicular areas up to 3.5 tonnes

    Similar to ProJoint™ Fusion™, ProJoint™ MAX™ offers a quick and easy solution to filling joints between paving slabs and setts but in areas of vehicular access. 

    Suitable for natural stone and concrete paving, ProJoint™ MAX™ is a high strength two-part epoxy paving grout and is very simple to use. Resin and sand are supplied ready-mixed within the tub, and only requires the addition of the enclosed hardener to activate the chemical cure.  Once cured, ProJoint™ MAX™ delivers a weed-free, frost resistant joint which resists pressure washing.

KEY FACTS:

  • Permeable bedding mix not required
  • Part mixed components for fast application, all supplied within the mixing tub
  • Professional strength, self-compacting and suitable for joint widths of 5mm upwards
  • Weed, pressure washer and frost resistant
  • Ideal for paths and patios as well as driveways or other vehicular areas (up to 3.5 tonnes)
  • Suitable for natural stone and concrete paving, setts and slabs

NOTE:  as sand is a natural product, some minimal colour variance may occur.  As screen colours can vary, the product colours shown above are representative only - for colour selection, cured product samples are available to view at your local stockist. 


  Approximate coverage per 15kg tub:


  Order codes for ProJoint MAX:

Joint Size
600x600mm slabs
Four size Indian
(600mm series)
100x100mm setts
5 x 25mm
22.5m2
19.5m2
4m2
10 x 25mm
11.25m2
9.75m2
2m2
15 x 25mm
7.5m2
6.5m2
1.34m2

 
 
  Pack size:
  15kg
  Pallet quantity:
  50 (can be a combination 
  of product/colour)
  
  Product colour       
  Product code
  Neutral/buff
  MAXN
  Mid grey
  MAXG
  Black
  MAXBK
  • Search for your nearest stockist:

    Enter your postcode.

    SEARCH